The PEX2S5531P 2S1P PCI Express Card turns a PCI Express slot into two RS232 (DB9) serial ports and one Parallel port. The adapter card features a native PCI Express single chip design that allows you to take advantage of full PCI Express capability, providing improved speed and reliability while reducing the load applied to the CPU by as much as 48% over conventional serial cards which use a bridge chip design.
Compatible with a broad range of operating systems including Windows?? 2000/XP/2003/Vista???/Windows 7/Server 2008 R2 (32 and 64-bit), Linux Kernel 2.6.11 and up, and MAC OS 10.4, this 2 Port Serial 1 Port Parallel PCI-Express Card also features an optional low profile/half-height bracket that allows the card to be installed in virtually any computer case, regardless of the case form factor.
This product is a replacement for our PEX2S5521P card.
Backed by a StarTech.com Lifetime warranty and free lifetime technical support.
Features
??? Two high speed RS232 serial ports with data transfer rate up to 460.8 Kbps
??? One parallel port with data transfer rate up to 1.5 Mbps
??? 128-byte deep FIFO per transmitter and receiver
??? Configurable in 5V, 12V, and RI (non-powered) modes.
??? Selectable power output on pin 9 for the serial port
??? Native single-chip, single lane PCI Express
Warranty
Lifetime
Bus Type
PCI Express
Carton Quantity
50
Connector Types
1 - DB25 Male
Connector Types
2 - DB9 Male
General Specifications
Readable flow control status and FIFO levels
Note
Selectable power output on pin 9 of the serial port
Number of Ports
2
Parallel
1.5 Mbps
Product Height
20
Product Length
105
Product Weight
140
Product Width
120
RS-232
460.8 Kbps
Shipping (Package) Weight
0.55 lb 0.25 kg
Supports
x1, x2, x4, x8, x16(lane)
Card Type
Low / Standard Profile
Humidity
585% RH
Operating Temperature
-20C to 85C (-4degF to 185F)
Storage Temperature
-40C to 85C (-40degF to 185F)
Chipset ID
MosChip MCS9901CV-CC
OS
Compatibility DOS, Windows 95/ 98SE/ 2000/ XP(32/64bit)/ Server 2003(32/64bit)/ Vista(32/64bit)/ 7(32/64bit)/ Server 2008 R2, Linux, and Mac OS 10.4.x and up
Windows XP Embedded/ POS Ready 2009/ Embedded System 2009 OS/ CE 5.0/ CE 6.0