OUTPUT
Output Volt Amp Capacity (VA):1500
Output kVA capacity (kVA):1.5
Output Watt Capacity (watts):1350
Output kW capacity:1.35
Output power factor:0.9
Nominal Output Voltage(s) Supported:120V

Frequency compatibility:60 Hz
Output voltage regulation (line mode):-21%, +8%
Output voltage regulation (Battery mode):+/- 5%
Built-in UPS output receptacles:8 5-15R outlet(s)
Built-in controllable switched load banks:Two switchable two-outlet 5-15R load banks
Output AC waveform (AC mode):Sine wave
Output AC waveform (battery mode):Pure Sine wave

INPUT
Rated input current (at maximum load):12A
Nominal Input Voltage(s) Supported:120V AC
UPS input connection type:5-15P
Input circuit breaker:15A
UPS Input cord length (ft.):10
UPS Input cord length (m):3
Recommended Electrical Service:15A 120V

BATTERY
Full load runtime (minutes):4.5 min. (1350w)
Half load runtime (minutes):13 min. (675w)
DC system voltage (VDC):36
Battery recharge rate (included batteries):Less than 4.5 hours from 10% to 90%
Replacement battery cartridge (internal UPS battery replacement):RBC93-2U
Battery Access:Front panel battery access door
Battery replacement description:Hot-swappable, user replaceable batteries

VOLTAGE REGULATION
Voltage regulation description:Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage correction:Input voltages between 128 and 147 are reduced by 12%
Undervoltage correction:Input voltages between 83 and 107 are boosted by 14%

LEDS ALARMS and SWITCHES
Front panel LCD display:Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)

Alarms:Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions

Alarm cancel operation:Power-fail alarm can be temporarily silenced using alarm-cancel switch silent mode alarm configuration option available

Switches:3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions

SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating:570
UPS AC suppression response time:Instantaneous
EMI / RFI AC noise suppression:Yes

Installation form factors supported with included accessories
4 post 19 inch rackmount (mounting rail kit included)

Installation form factors supported with optional accessories
2 post rackmount (2POSTRMKITWM) Wallmount (2POSTRMKITWM) Tower (2-9USTAND)

Primary form factor
Rackmount

Installed whole system total rack space height (rack spaces):
2U

Secondary form factor:
Tower (requires 2-9USTAND)

UPS housing material
Steel

Cooling method
Fan

AC mode BTU / hr. (full load):
267

COMMUNICATIONS
Communications interface:USB DB9 Serial EPO (emergency power off) Slot for SNMP/Web interface
Network monitoring port description:Includes PRE-INSTALLED SNMPWEBCARD interface card. Supports detailed monitoring of UPS and site power conditions
PowerAlert software:Included

Communications cable:USB and DB9 cabling included
WatchDog compatibility:Supports Watchdog application, OS and hard-reboot restart options for remote applications

LINE / BATTERY TRANSFER
Transfer time:2-4 milliseconds
Low voltage transfer to battery power (setpoint):83
High voltage transfer to battery power (setpoint):147

SPECIAL FEATURES
Grounding lug:Back panel grounding lug
Cold Start (startup in battery mode during a power failure):Cold-start operation supported
High availability UPS features:Hot swappable batteries
Green and high efficiency features:Greater than 95% efficiency - GREEN UPS Individually controllable load banks

CERTIFICATIONS
UPS Certifications:Tested to UL1778 (USA) Tested to CSA (Canada) Tested to NOM (Mexico) Meets FCC Part 15 Category B (EMI)

Item Dimension (L"xW"xH"):
7.9 x 22.85 x 19.35

Weight:
57.6 lb

Warranty Information:
2-year warranty, 3 years with registration