Form Factor
2U Rackmount

Processor/Cache
CPU:
- Intel Xeon processor E5-2600 v3 family (up to 145W TDP)
- Dual Socket R3 (LGA 2011)
Cores/Cache:
- Up to 18 Cores / Up to 45MB Cache
System Bus:
- QPI up to 9.6GT/s

System Memory
Memory Capacity:
- 16 x 288-Pin DDR4 DIMM Slots
- Up to 1TB ECC LRDIMM 512GB ECC RDIMM
Memory Type:
- 2133/1866/1600MHz ECC DDR4 SDRAM 72-Bit
DIMM Sizes:
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
Memory Voltage
- 1.2V
Error Detection:
- Corrects Single Bit Errors

On-Board Devices
Chipset:
- Intel C612 Express Chipset
SATA:
- SATA 3.0 (6Gbps) with RAID 0, 1, 5, 10
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers:
- Intel i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics:
- Aspeed AST2400 BMC

Input/Output
Serial ATA:
- 8 x SATA 3 (6Gbps) Ports
- 2 x SATA 3 Powered Ports that Support SATA DOM
LAN:
2 x RJ45 Gigabit Ethernet LAN Ports
- 1 x RJ45 Dedicated IPMI LAN Ports
USB:
- Rear USB: 2x USB 3.0 + 2x USB 2.0
- Front USB: 2x USB 2.0
- USB Header: 2x 3.0, 2x 2.0, 1x Type A
VGA:
- 1 x VGA Port
Serial Port / Header:
- 2 x Fast UART 16550 Serial
- 2 x COM Ports (1 Rear, 1 Header)
DOM:
2 x SuperDOM (Disk on Module) Ports

Management
Software:
- SuperDoctor 5
- Watch Dog
- NMI, SPM, SUM
- IPMI 2.0
Intel Node Manager
Power Configurations:
- ACPI / APM Power Management
- Power-on Mode for AC Power Recovery

Front Panel
Buttons:
- Power On/Off Button
- System Reset Button
- UID Button
LEDs:
- Power Status LED
- HDD Activity LED
- 2 x Network Activity LEDs
- System Information (Overheat/UID) LED

Expansion Slots
PCI Express:
-3 x PCIE 3.0 x 16 (Low Profile)
- 3 x PCIE 3.0 x 8 (Low Profile)

Drive Bays
Hot-Swap: 8 x 3.5 Hotswap SATA HDD Trays

Backplane
2U SAS/SATA Backplane

System Cooling
Fans:
3x 80x80x38mm Counter-rotating PWM fans

Power Supply with Power Distributor
740W (1+1) Redundant high-efficiency power supply with PMBus
AC Input:
- 100-240V, 50-60Hz, 9-3.5 Amp
DC Output:
- 4 Amp at +5V Standby
- 61.7 Amp at +12V
Certification:
- 80 PLUS PLATINUM Certified

System BIOs
BIOs Type:
- 128MB SPI Flash EEPROM with AMI BIOs
BIOs Features:
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard Support
- SMBIOS 2.7.1
UEFI 2.3.1

Operating Environment / Compliance
RoHS:
- RoHS Compliant
Environmental Specs:
- Operating Temperature: 10 C to 35 C (50 F to 95 F)
- Non-Operating Temperature: -40 C to 70 C (-40 F to 158 F)
- Operating Relative Humidity: 8% to 90% (Non-Condensing)
Non-Operating Relative Humidity: 5% to 95% (Non-Condensing)

Item Dimension (L"xW"xH")
34.5 x 26 x 11

Weight
69.00 lb

Warranty Information
1 Year