Neutrino Bridge
The Neutrino Bridge is a two in one product designed to hold a single 2.5" drive. It is both a 2.5" to 3.5" drive adapter with a regular internal SATA interface as well as a next generation USB 3.1 Gen 2 (10G) drive when connected externally. Quickly and easily accessing the data on an SSD has never been easier and faster than with this dual interface drive adapter.
Features:
??? USB 3.1 Gen 2 interface with transfer speeds up to 10 Gbps
??? Dual-interface with USB 3.1 and SATA connectivity
??? Backwards compatible with USB 3.0 and USB 2.0 devices
??? Supports SATA-III drives for increased transfer rates
??? Fully bus powered (can be used without power adapter)
??? LED activity indication for USB interface
??? High quality all aluminum frame
SuperSpeed USB 3.1 Gen 2 (10G)
The SuperSpeed USB 10 Gbps (USB 3.1) specification adds a 10 Gbps speed mode that uses a more efficient data encoding and will deliver more than twice the effective data through-put performance of existing SuperSpeed USB. At the same time, especially with the regular USB 3.0 Micro-B connector that is used in the Neutrino Bridge, it is still fully backwards compatible with existing 5 Gbps USB 3.0 devices and cables as well as USB 2.0 products.
To achieve the best possible transfer rates, make sure that the host computer supports the new USB 10 Gbps (USB 3.1 Gen 2) specification and use a short cable under 50 cm.
2.5??? to 3.5??? Drive Adapter
Many external hard drive enclosures are designed for the larger 3.5" desktop drives and have no mounting options for the smaller 2.5" drives. With this 2.5" to 3.5" drive adapter, you can now install your SSD or laptop drive in any device or drive slot designed for desktop drives, making it possible to use your existing equipment without having to buy a separate hard drive enclosure.
Model No.
Neutrino Bridge
Model No.
Neutrino Bridge
Case Material
All Aluminum Frame
Application
Up to four 2.5" SATA 6Gb/s SSD or HDD
RAID Mode
Non-RAID
Interface/Ports
1x Micro-B USB 3.1 SuperSpeed port (backwards compatible with USB 3.0 and 2.0)
1x SATA 7+15 pin connector
Data Transfer
USB 3.1 up to 10Gbps (1250MB/s)
USB 3.0 up to 5Gbps (625MB/s)
SATA III Up to 6Gbps (750MB/s)
System Requirements (PC)
USB 3.1: Windows 7 or above
USB 3.0: Windows XP or above
Computer with USB 3.1 or USB 3.0 connector
System Requirements (Mac)
USB 3.1: Mac OS 10.10.2 or above
USB 3.0: Mac OS 10.7 or above
Computer with USB 3.1 or USB 3.0 connector
System Environment
Operating Temperature: 5 C to 35 C
Storage Temperature: -20 C to 60 C
Relative Humidity: 5% to 95% (Non-Condensing)
Power Supply
USB: Bus Power 5V/900mA (host computer has to provide sufficient USB bus power)
SATA: Requires SATA Power Cable
Fan Noise Level
N/A
Package Contents
Neutrino Bridge
Setup Guide
Item Dimension (L"xW"xH")
21.4 x 15.8 x 3.6
Weight
10.24 lb
Warranty Information
2 Years