Form Factor
uATX

Processor/Cache
CPU:
Intel Xeon processor E3-1200 v3 and 4th Gen Core i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)

System Memory
Memory Capacity:
4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)

Memory Type:1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes:8GB, 4GB, 2GB, 1GB
Memory Voltage:1.5V, 1.35V
Error Detection:
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset:Intel C224 Express PCH

SATA:
SATA3 (6Gbps) w/ RAID 0, 1, 10, 5
SATA2 (3Gbps) w/ RAID 0, 1

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC

Network Controllers:
Intel i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI)

VGA:BMC integrated Aspeed AST2400

Input / Output
Serial ATA:
4x SATA3 (6Gbps) ports
2x SATA2 (3Gbps) ports

LAN:
2x Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port

USB:
4x USB 3.0 ports (2 rear, 1 Type-A, 1 via header)
6x USB 2.0 ports (2 rear, 4 via header)

VGA:1x VGA D-Sub Connector
Serial Port / Header:2x COM ports (1 rear, 1 header)
DOM:SATA DOM (Disk on Module) power connector support
TPM:1x TPM 1.2 20-pin Header

Expansion Slots
PCI-Express:
1 (x8) PCI-E 3.0 in x16 slot
1 (x8) PCI-E 3.0 slot
1 (x4) PCI-E 2.0 in x8 slot

System BIOS
BIOS Type:128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features:
DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support

Management
Software:
IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor III
Watch Dog
NMI

Power Configurations:
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on

PC Health Monitoring
Voltage:
Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

FAN:
Total of five 4-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors

Temperature:
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2)
support
PECI

LED:
CPU / System Overheat LED
+5V Standby alert LED

Other Features:Chassis intrusion detection
Chassis intrusion header

Weight:
3 lb

Warranty Information:
3 Years