Form Factor
Proprietary

CPU
Dual 1944-pin Socket G34
Supports up to two 16/12/8/4-Core ready AMD Opteron^TM6000 Series processors
HT3.0 Link support

Chipset
AMD chipset SR5690 / SP5100

Memory Capacity
24 DIMM sockets
Supports up to 768GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066
SDRAM in 24 DIMMs
Quad channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks

Memory Type
DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes
1GB, 2GB, 4GB, 8GB, 16GB, 32GB

Memory Voltage
1.35V or 1.5V

Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices
SATA : AMD SP5100 (RAID 0, 1, 10)
IPMI : Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM over LAN support
Winbond WPCM450 BMC
Network Controllers : 2x Intel 82576 controller, Dual-Port
Gigabit Ethernet
10/100/1000BASE-T support
VGA : Matrox G200eW 16MB DDR2
Super I/O : Winbond 83527HG chip

Input / Output
SATA : 6x SATA (3Gb/s) Ports
LAN : 4 RJ45 LAN ports, 1x RJ45 Dedicated LAN supports IPMI
USB : 7x USB 2.0 ports, 2x Rear, 2x header(4 ports), 1x Type A
VGA : 2x VGA port
Keyboard / Mouse : PS/2 keyboard and mouse ports
Serial Ports : 1 Fast UART 16550 serial port, 1 serial port header
Others : 1UID, 1 SATA DOM power connector, TPM header

PCI-Express (Gen 2.0)
1U Left Slot: 1 PCI-E 2.0 x16 and UIO or 2 PCI-E 2.0 x8 or 1 PCI-E 2.0 x16 or 1 PCI-E 2.0 x8 and UIO
2U Left Slot: 2 PCI-E 2.0 x8 and UIO or 3 PCI-E 2.0 x8 or 1 PCI-E 2.0 x16 and UIO
2U Right Slot: 3 PCI-E 2.0 (x4 + x1 + x1) (via RSC-R2UU-2E2E4R Riser Card)

BIOS Type
16Mb Flash EEPROM with AMI BIOS

BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0
BIOS Rescue Hot Keys
USB Keyboard Support
Hardware BIOS Virus Protection
SMBIOS 2.3

Software
IPMI (Intelligent Platform Management Interface) 2.0
Super Doctor III
Watch Dog

Power Configurations
ACPI Power Management
Power-on mode control for AC power loss recovery

PC Health Monitoring
CPU : Monitors CPU Core Voltages, +3.3V, +5V, 12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage, CPU switching voltage regulator
FAN : Total up to 8-fan status tachometer monitoring , Status monitor for speed control, Stauts monitor for on/off control, Low noise fan speed control
Temperature : Monitoring for CPU and chassis environment, CPU Thermal Trip Support, Thermal Control for 8x Fan Connectors, I2C Temperature Sensing Logic
LED : CPU / System Overheat LED, Suspend-State Indicator LED, +5V Standby Alert LED, UID/Remote LED
Other Features : Chassis Intrusion Detection, Chassis Intrusion Header

RoHS
RoHS Compliant 6/6, Pb Free

Operating Temperature
10^oC to 35^oC (50^oF to 95^oF)

Non-operating Temperature
-40^oC to 70^oC (-40^oF to 158^oF)

Operating Relative Humidity
8 percent to 90 percent (non-condensing)