Processor/Cache
CPU:
- Single Socket H4 (LGA 1151) supports:
- Intel Xeon processor E3-1200 v5, Intel 6th Gen Core i3, Intel Pentium, Intel Celeron processors
CPU TDP up to 80W

System Memory (Per Node)
Memory Capacity:
- 4 x 288-Pin DDR4 DIMM Slots
- Supports up to 64GB DDR4 ECC Unbuffered Memory (UDIMM)
Memory Type: 2133MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated UDIMMs
DIMM Sizes:
- 16GB, 8GB, 4GB
Memory Voltage: 1.2V
Error Detection:
- Corrects Single Bit Errors
- Detects double-bit errors (using ECC memory)

Expansion Slots
PCI-Express:
- 1 x PCI-E 3.0 x8 Low Profile Slot
1 x Micro LP for Dual GbE (Pre-Installed), 10GbE or IB ACC Optional

Network Devices (Per Node)
Micro-LP NIC:
- Intel i350 GbE Controller
- Dual RJ-45 Connector
-Supports 10BASE-T, 100BASE-TX and 1000BASE-T, RJ45 Output
Intel I/O Acceleration Technology (I/O AT)
MicroLP Adapter Matrix (Networking Options)

On-Board Devices (Per Node)
Chipset: Intel C236 Chipset
SATA: SATA 3 (6Gbps), Via C236 Controller
IPMI:
- Support for Intelligent Platform Management Interface v2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN Support
- ASPEED AST2400 BMC
Headers:
- 1 x Type A USB 3.0
Video: ASPEED AST2400 Graphics (BMC with Graphics Controller)

Input/Output
SATA: 2 x SATA3 (6Gbps) Ports LAN:
- 2 x RJ45 Gigabit Ethernet LAN Ports
1 x RJ45 Dedicated IPMI LAN Port
DOM:
- SATA DOM (Disk on Module) Power Connector Support
KVM: 1 x VGA, 1 x COM and 2 x USB 2.0 (with KVM Dongle)

System BIOs
BIOs Type: 128MB SPI Flash EEPROM with AMI BIOs
BIOs Features:
- DMI 2.3
- ACPI 1.0/2.0
- USB Keyboard Support
- SMBIOS 2.3

Rear Window (Each Node)
Power / UID

Front Panel
Buttons:
- Power On/Off Button
LEDs:
- Power LED
- Node Status LED

Drive Bays
Internal:
- 2x3.5inch Hot-Swap SATA 3 (6Gbps) HDDs per Node (or 2x2.5 SATA with Optional Kits), UP to 16 HDDs Total

System Cooling
Fans: 4x8cm Heavy Duty fans with optimal cooling zone

Power Supply
1600W Titanium Level (96%) High-Efficiency Redundant Single Output Power Supply
AC Input:
- 800W Output at 100 to 140V, 7-10A, 50/60Hz
- 1600W Output at 180-240V, 8-11A, 50/60Hz
DC Output:
- 800W +12V 67A +5Vsb/1A
- 1600W +12V 133A +5Vsb/1A
Certification: 80 PLUS TITANIUM Level

PC Health Monitoring
CPU:
- Monitors for CPU Cores +3.3V, +5V, +12V, 3.3V Standby, +5V Standby VBAT Memory, Chipset Voltages
- 3 Phase Switching Voltage regulator with auto-sense from 0.5V to 2.3V

Operating Environment/Compliance
RoHS: RoHS Compliant
Environment/Compliant:
- Operating Temperature: 10 C to 35 C (50 F to 95 F)
Non-Operating Temperature: -40 C to 70 C (-40 F to 158 F)
Operating Relative Humidity: 8% to 90% (Non-Condensing)
Non-Operating Relative Humidity: 5% to 95% (Non-Condensing)

Form Factor
3U

Weight
88.00 lb

Warranty Information
1 Year