Form Factor
Proprietary

CPU
Intel Xeon processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)

System Memory
Memory Capacity : 4x 240-pin DDR3 DIMM sockets, Supports up to 32 GB DDR3 ECC VLP Un-Buffered memory (UDIMM)
Memory Type : 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes : 8GB, 4GB, 2GB, 1GB
Memory Voltage : 1.5 V
Error Detection : Corrects single-bit errors, Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset : Intel C224 Express PCH
SATA : SATA3 (6Gbps) w/ RAID 0, 1, 10, 5
IPMI : Support for Intelligent Platform Management Interface v.2.0, IPMI 2.0 with virtual media over LAN and KVM-over-LAN support, HDD Fail detection via IPMI, Nuvoton WPCM450 BMC
Network Controllers : 1x Realtek RTL8211E PHY (dedicated IPMI)
VGA : BMC integrated Aspeed AST2400

Input / Output
Serial ATA : 4x SATA3 (6Gbps) ports
LAN : 1x RJ45 Dedicated IPMI LAN port
USB : 3x USB 3.0 ports (1 Type-A, 2 via header)
DOM : SATA DOM (Disk on Module) power connector support
TPM : 1x TPM 1.2 20-pin Header

PCI-Express
1x PCI-E 3.0 x8 in Micro-LP for Dual GbE, 10GbE or IB AOC

BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features
DMI (SMBIOS) 2.7, ACPI 5.0, USB Keyboard support

Management
Software :
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor III
Watch Dog
NMI
Power Configurations :
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on

Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

FAN
Total of 5 fan headers supporting up to 5 fans
Five 4-pin fan headers
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors

Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI

LED
CPU / System Overheat LED
+5V Standby alert LED

Other Features
Chassis intrusion detection
Chassis intrusion header

Operating Environment
Operating Temperature Range : 0^oC to 50^oC (32^oF to 122^oF)
Non-Operating Temperature Range : -40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity Range : 8% to 90% (non-condensing)
Non-Operating Relative Humidity Range : 5% to 95% (non-condensing)

Item Dimension (L inchxW inchxH inch)
N/A

Weight
3.00lb

Warranty Information
1 year