Focus on Americas Market
View Quotation Cart ( 0 )
SYS-F628R3-RC0BPT+ | ActForNet

MPN: SYS-F628R3-RC0BPT+
Category: Barebones/Complete Systems >> Xeon Barebone
Vendor: Supermicro
Weight: 150 LB(S)
Price: US$ 6665.84

-
+
Key Features

1. Dual socket R3 (LGA 2011) supports Intel Xeon processor E5-2600 v4/ v3 family QPI up to 9.6GT/s
2. Up to 2TB ECC 3DS LRDIMM , up to DDR4- 2400MHz 16x DIMM slots
3. Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x8 (Micro Low Profile) See Cable Configuration Map
4. I/O ports: 2 10GBase-T ports, 1 video, 2 USB 3.0 ports
5. Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port
6. 6+2 3.5" Hot-swap SAS3 HDD Bays 8x SAS3 or 6x SAS3 + 2x NVMe SAS3 via LSI 3008 controller
7. 2x 80mm 11k RPM middle fans
8. 1280W Redundant Power Supplies Platinum Level (95%)

Processor/Cache

CPU
Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache
Up to 22 Cores / Up to 55MB Cache
System Bus
QPI up to 9.6 GT/s

System Memory

Memory Capacity
16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors

On-Board Devices

Chipset
Intel C612 chipset
SAS
SAS 3.0 (12Gbps) via LSI 3008
HBA/SW RAID 0, 1, 10 support
SATA
SATA 3.0 (6Gbps) w/ RAID 0, 1, 5, 10
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers
Intel X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
ASPEED AST2400

Input / Output (per node)

SAS
8x SAS3 (12Gbps) ports
LAN
2x RJ45 10GBase-T LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB 3.0 ports
VGA
1x VGA port

Management

Software
SuperDoctor 5
Watch Dog
NMI
IPMI 2.0
SUM and SSM
Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery

Form Factor
4U Rackmount

Front Panel

Buttons
Power On/Off button
UID button
LEDs
Power status LED
Hard drive activity LED
2x Network activity LEDs
Information LED (UID, Fan failure, Overheat)

Expansion Slots (per node)

PCI-Express
1 PCI-E 3.0 x16 (LP) + 1 Micro LP
MicroLP Adapter Matrix (Networking options)

Drive Bays (per node)

Hot-swap
(6+2) 3.5" Hot-swap SAS3 HDD trays

Backplane
1x SAS/SATA backplane
1x SAS/SATA/NVMe hybrid (2 slots)

Fans
2x 8cm 11k RPM middle fans

Power Supply

1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
1000W Output 100-140V, 8-12A, 50-60Hz
1280W Output 180-240V, 6-8A, 50-60Hz
DC Output
1000W: +12V/83A +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A

System BIOS

BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI

Operating Environment / Compliance

RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
10C to 35C (50F to 95F)

Non-operating Temperature:
-40C to 70C (-40F to 158F)

Operating Relative Humidity:
8% to 90% (non-condensing)

Non-operating Relative Humidity:
5% to 95% (non-condensing)

Item Dimension (L inchxW inchxH inch)
NA

Weight
150.00 lb

Warranty Information
1 Year