Form Factor
Flex ATX

Processor/Cache
CPU:
- Intel Pentium Processor D1508 2.2GHz to 2.6GHz, CPU TDP Support 25W
FCBGA 1667
Cores/Cache:
- 2 Cores, 4 Threads / 3MB

System Memory
Memory Capacity
- 4x DDR4 DIMM sockets
- Supports up to 128GB DDR4 ECC RDIMM
- Supports up to 64GB DDR4 ECC/non-ECC UDIMM
Memory Type: 1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 32GB, 16GB, 8GB, 4GB
Memory Voltage: 1.2V
Error Detection:
- Corrects Single Bit Errors
- Detects Double Bit Errors (Using ECC Memory)

On-Board Devices
Chipset: System on Chip
SATA: SoC Controller for 4 SATA3 (6Gbps) Ports, RAID 0, 1, 5, 10 RSTE
Network Controller
- Dual 10G SFP+ from D-1500 SoC
- Dual 1GbE with Intel I210
IPMI:
- Support for Intelligent Platform Management Interface v2.0
- IPMI 2.0 with Virtual Media Over LAN and KVM-Over-LAN Support
Video: Aspeed AST2400
TPM: TPM 2.0 Header

Input/Output
SATA: 4 x SATA3 (6Gbps) Ports
LAN:
- 2 10G SFP+ LAN ports
- 2 1GbE LAN ports
- 1 Dedicated IPMI LAN port
USB:
- 2 USB 3.0 ports (rear)
- 5 USB 2.0 ports (4 via headers, 1 Type A)
Video: 1 x VGA
Serial Port/Header: 1 COM Port (Header)
DOM: 2 SuperDOM (Disk on Module) power connectors

Expansion Slots
PCI-Express: 2 x PCI-E 3.0 x8 Slots
M.2:
- Interface: PCI-E 3.0 x4
- Form Factor: M Key 2242/2280/22110
- Support SATA devices
Mini PCI-E:
- Interface: PCI-E 2.0 x1
- Support mSATA

System BIOs
BIOs Type: 128Mb SPI Flash with AMI BIOS
BIOs Features:
- PCI 3.0
- ACPI 5.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.8
- UEFI 2.4
- RTC (Real Time Clock) Wakeup

Management
Software:
- Intel Node Manager
- IPMI 2.0
- KVM with dedicated LAN
- NMI
- SUM
- SuperDoctor 5
- Watch Dog
Power Configurations:
- ACPI Power Management
- ATX Power connector
- +12V DC Power Input
- Control of power-on for recovery from AC power loss
- CPU thermal trip support for processor protection
- M.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL

PC Health Monitoring
Voltage:
- Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, System level control, VBAT
Fan:
- Total of six 4-pin fan headers supporting tachometer status monitoring
- Dual Cooling Zone
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature:
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
LED: CPU/System Overheat LED
Other Features:
- Chassis intrusion detection
- Chassis intrusion header
- 12V DC or ATX Power Source
- RoHS

Operating Environment
0 C to 60 C (32F to 140 F)

Weight
3.00 lb

Warranty Information
1 Year