Focus on Americas Market
View Quotation Cart ( 0 )
FSP700-80WEPB | ActForNet

MPN: FSP700-80WEPB
Category: Power Supply >> Server Power Supply
Vendor: FSP Group
Weight: 5.6 LB(S)
Price: US$ 197.22

-
+
FSP700-80WEPB is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 700 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.


Features

??? 80 Plus Platinum

??? Low Ripple & Noise

??? Output over voltage protection

??? Short circuit protection on all outputs

??? Resettable power shut down

??? Four +12V output (+12V/1,+12V/2,+12V/3,+12V/4)

??? 100% burn-in under high ambient temperature(50???)

??? Vacuum-impregnated transformer

??? MTBF:100K hours at 25???

??? 100% Hi-pot tested

??? Line input fuse protection

Wattage
700W

Product Highlight
Efficiency Level: 80 Plus Platinum
Altitude: 5000M
PMBus: V1.2

General Specification
Effciency: 92% 230VAC
Voltage Regulation: +3.3V, +12V, +5V, +5SB: +/-5%
12V: +/-10%

Input Electrical Specification
Input Frequency: 47 to 63 Hz
Input Current:
- 115V at 12.0 Amps-rms maximum
- 230V at 6.0 Amps-rms maximum

Output Specification
Hold-up time:
- 115V/60Hz 16mSec. Minimum at 100% Load,
- 230V/50Hz 16mSec. Minimum at 100% Load
Ouput Voltage Regulation:
- +3.3Vdc output : +3.5 Vdc minimum, + 4.5Vdc maximum
- +5Vdc output : +5.5 Vdc minimum, + 6.82Vdc maximum
- +12Vdc output : +13.4 Vdc minimum, + 15.6Vdc maximum
Ripple and Noise: 115V-rms/230V-rms 5V 20ms Maximum
Over current protection:- 3.3V:50mV p-p
- 5V:50mV p-p
- 12V1:120mV p-p
- 12V2:120mV p-p
- 12V3:120mV p-p
- 12V4:120mV p-p / 12V:120mV p-p
- 5Vsb:50mV p-p

Environmental Requirement
Temperature Range:
- Operating : 0 to +50oC
- Storage :-20 to +80oC
Humidity: - Operating: 85% to % RH, Non-condensing
- Storage : 95% to % RH, Non-condensing
MBTF: The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25oC, maximum-output load, and nominal AC inout voltage

Safety
CE,FCC,TUV,UL/cUL,CCC

Output Voltage and Current Rating(+3.3V/ +5V/ +12V1/ +12V2/ +12V3/ +12V4/ -12V/ +5Vsb)
Ripple-Noise(R-P) mV: 50mV / 50mV / 120mV / 120mV / 120mV / 120mV / 120mV / 50mV
Regulation Load %: +/-5% / +/-5% / +/-5% / +/-5% / +/-5% / +/-5% / +/-10% / +/-5%
Output Max.(A): 25A / 30A / 16A / 16A / 16A / 16A / 0.5A / 4A
Output Min.(A): 0.1A / 1A / 1A / 1A / 1A / 1A / 0A / 0A

Notes
- The +3.3V and +5V total output shall not exceed 150 watts.
- The total output shall not exceed 600 watts
- Maximum combined current for the 12V outputs shall be 48A
- Ripple and noise measurements shall be made under all specified load conditions through a singple pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.

Item Dimension (L inchxW inchxH inch)
11 x 4 x 3

Weight
5.60 lb

Warranty Information
3 Years