Device
Device Type: Video Encoder
Number of Channels: 8

PTZ
Protocol: Pelco-D, Pelco-P, Dynacolor
Control: Remotely manual control 32 preset points

Video
Compression: H.264 HP, MJPEG
Max. Frame Rate vs. Resolution:
- 30 fps at 960 x 480 (NTSC)
- 25 fps at 960 x 576 (PAL)
- 30 fps at 720 x 480 (Full D1, NTSC)
- 25 fps at 720 x 576 (Full D1, PAL)
Multi-Streaming: Simultaneous dual streams based on two configurations
Bit Rate: 28 Kbps - 6 Mbps (per stream)
Bit Rate Mode: Constant, Variable
Image Enhancement: Brightness Saturation Contrast Sharpness
Privacy Mask: 4 regions
Text Overlay: User defined text on video
Image Orietation: Image flip image mirror

Audio
Compression: 8 kHz, Mono, PCM, 16 bit encoding, G.711
Audio-In: 8, terminal block
Audio-Out: 1, terminal block

Network
Protocol and Service: TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Ethernet Port: 1, Gigabit Ethernet (10/100/1000 Base-T), RJ-45 connector
Security: IP address filtering HTTPS encryption Password protected user levels, IEEE 802.1X network access control Anonymous login

Alarm
Alarm Trigger: Video motion detection (3 regions), External device through digital input Scheduler in minutes, System reboot and booting successfully, Video loss, Video recovery, Storage removed, Failed to write storage
Alarm Response: Notify control center, Go to PTZ preset point or preset tour, Change video settings, Command other devices, E-mail notification with snapshots, Save video to local storage, Upload video or snapshot to FTP server, Activate external device through digital output, Change motion detection profile

Interface
Analog Video Input: 8, CVBS, 1.0Vp-p with 75 BNC connector
Digital Input / Output: 8 (configurable), terminal block
Serial Port: 2, RS-485/RS-422, terminal block
Local Storage: MicroSD/MicroSDHC memory card slot (card not included)

General
Power Source / Consumption: AC 100 - 240V (50/60 Hz) / 9.36 W
Operating Temperature: -10^oC to 50^oC (14^oF to 122^oF)
Operating Humidity: 10% to 85% RH
Approvals: CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), UL (for built-in power adapter)

Integration
Unified Solution: Fully compatible with ACTi software
ISV Integration: Software Development Kit (SDK) available ONVIF compliant
Firmware Access Browser: Microsoft Internet Explorer 8.0 or newer (full functionality), Safari with QuickTime installed, and other browsers with VLC installed (partial functionality)

Item Dimension (L inchxW inchxH inch)
18 x 2 x 6

Weight
6.60 lb

Warranty Information
3 Years