Focus on Americas Market
View Quotation Cart ( 0 )
SYS-1028GQ-TRT(3YR) | ActForNet

MPN: SYS-1028GQ-TRT(3YR)
Category: Barebones/Complete Systems >> Xeon Barebone
Vendor: Supermicro
Weight: 58 LB(S)
Price: US$ 2769.25

-
+
1. Dual socket R3 (LGA 2011) supports Intel?? Xeon?? processor E5-2600 v4???/ v3 family; QPI up to 9.6GT/s
2. Up to 512GB??? ECC 3DS LRDIMM , up to DDR4- 2400???MHz ; 16x DIMM slots
3. 4x PCI-E 3.0 x16 slots (4x GPU/ Xeon Phi cards opt.), 2x PCI-E 3.0 x8 (in x16) LP slot
4. Dual port 10GbE LAN
5. 2x 2.5" Hot-swap drive bays,2x 2.5" internal drive bays
6. 9x 4cm heavy duty counter-rotating fans with air shroud & optimal fan speed control
7. 2000W Redundant Power Supplies Platinum Level (94%+)

Processor/Cache
CPU:Intel Xeon processor E5-2600 v4
/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache:Up to 22 Cores
/ Up to 55MB
Cache
System Bus:QPI up to 9.6 GT/s
Note: BIOS version 2.0 or above is required
Note: Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support:K1/K2/K10/K40/K80/M40/M60/Xeon Phi

System Memory
Memory Capacity:16x 288-pin DDR4 DIMM slotsUp to 512GB ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type:2400
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes:RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage:1.2 V
Error Detection:Corrects single-bit errors

On-Board Devices
Chipset:Intel C612 chipset
SATA:SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI:Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers:Dual Port 10GbE
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics:ASPEED AST2400 BMC

Input / Output
SATA:4x SATA3 (6Gbps) ports
LAN:2x RJ45 Gigabit Ethernet ports
1x RJ45 Dedicated IPMI LAN port
USB:2x USB 3.0 ports (2 via headers)
Video:1x VGA Connector
Serial Port:1x Serial header

System BIOS
BIOS Type:128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0 / 3.0
USB Keyboard support
SMBIOS 2.7.1
UEFI

Chassis
Form Factor:1U Rackmount
Model:CSE-118GQE-R2K03P

Dimensions and Weight
Height:1.7" (43mm)
Width:17.2" (437mm)
Depth:35.2" (894mm)
39.3" (997mm) with rails
Package:24" (H) x 8" (W) x 46" (D)
Weight:Net Weight: 45 lbs (15.9 kg)
Gross Weight: 58 lbs (21.8 kg)
Available Color:Black

Front Panel
Buttons:Power On/Off button
System Reset button
LEDs:Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /UID LED

Expansion Slots
PCI-Express:4x PCI-E 3.0 x16 slots(4x GPU/Xeon Phi cards optional)
2x PCI-E 3.0 x8 (in x16) low-profile slot

Drive Bays
Hot-swap:2x 2.5" Hot-swap drive bays
Fixed:2x 2.5" internal drive bays

System Cooling
Fans:9x 4cm heavy duty counter-rotating fans with air shroud optimal fan speed control

Power Supply
2000W 1U Redundant Power Supplies with PMBus
Total Output Power1000W/1800W/1980W/2000W
Dimension(W x H x L)73.5 x 40 x 265 mm
Input:100-120Vac / 12.5-10.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 10-9.8A (UL/cUL only)
200-240Vdc / 10-9.1A (CCC only)
+12V:Max: 83.3A / Min: 0.1A (100-120Vac)
Max: 150A / Min: 0.1A (200-220Vac)
Max: 165A / Min: 0.1A (220-230Vac)
Max: 166.7A / Min: 0.1A (230-240Vac)
Max: 166.7A / Min: 0.1A (200-240Vac) (UL/cUL only)
12V SB:Max: 3.5A / Min: 0A
Output Type:25 Pairs Gold Finger Connector
Certification: Platinum Level

PC Health Monitoring
CPU:Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
5 Phase-switching voltage regulator
FAN:Total of nine 4-pin PWM fans
9x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Temperature:Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 9x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED:Power Fail / Overheat LED
Suspend-state Indicator LED
UID LED
Other Features:SDDC Support

Operating Environment / Compliance
RoHS:RoHS Compliant
Environmental Spec.:Operating Temperature: 10oC to 35oC (50oF to 95oF)
Non-operating Temperature: -40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)

Item Dimension (L inchxW inchxH inch)
46 x 8 x 24

Weight
58.00lb

Warranty Information
3 Years