- Convert an SFP Fiber Interface into a 1000Base-T Copper Uplink

#NAME?

- Compatible with All Standard 1000Base-T Twisted Pair Copper Cabling

- Up to 1.25Gbps Bi-directional Data when Combined with an Additional DGS-712

Standard: IEEE 802.3ab 1000BASE-T Gigabit Ethernet

Transceiver Type: SFP (Small Form Pluggable)

Connector: RJ-45

Auto MDI/MDIX: Automatic crossover detection enabled; External crossover cable not required

Data Rate: 1,000 Mbps (IEEE 802.3 compatible); 10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T only

Cable Type: Cat. 5 twisted-pair cable

Maximum Cable Distance Coverage: 100 meters

Supply Current: 350mA (typical), 400mA (maximum), 1.3W max power over full range of voltage and temperature

Input Voltage: 3.1V (minimum), 3.3V (typical), 3.5V (maximum), Referenced to GND

Surge Current: 30mA; Hot plug above steady state current

Operating Temperature: 32?? to 185?? F (0?? to 85?? C)

Storage Temperature: -40?? to 185?? F (-40?? to 85?? C)

Waranty: 2 Years